HP-218 HP-218
THP-218 THP-218



Data Sheet
(0 Reviews)  Review this item


  • Precision Devices High-efficiency and high-rigidity cone 18-inch woofer.
  • Ported cabinet.
  • Ergonomic built-in handle.
  • Warm vibrant bass.
  • Party-style KTV, bar, nightclub.
  • High-end clubs, clubs, concert halls.
  • Restaurant, school, church, meeting rooms.
  • Leisure and entertainment venues, performing arts centres, theatres.

The HP-218 is a high-efficiency dual 18-inch ported subwoofer featuring two low distortion 18-inch woofers. It offers a frequency range of 28Hz to 200Hz (-10dB) and is designed to complement the HP series full-range speakers or other similar series. Its purpose is to extend the low-frequency response of sound reinforcement systems. It is also well suited to compliment any of the FPA bass products for ultimate bass reinforcement.

Utilizing two high-power low-frequency drivers with a 4-inch (100mm) voice coil from Precision Devices. Equipped with effective ventilation in their magnetic circuit structure, which efficiently lowers the operating temperature of the drivers during high-power usage, thus reducing instances of power compression in the speaker. The HP-218 port design, internal structure and large exit area significantly reduces the typical airflow noise associated with conventional low-frequency cabinet designs during dynamic operation, enhancing the efficiency of the tuned ports output, resulting in increased energy output in the ultra-low-frequency range and reduced low-frequency nonlinear distortion. The high transient low-frequency driver strikes a perfect balance between power and delivery in the low frequency domain.

HP-218, boasting a 2000W AES power rating can achieve an impressive peak sound pressure level of 136dB.

Featuring two recessed wooden handles on each side of the enclosure for convenient stacking or transportation. The enclosure’s bottom is equipped with four rubber feet, while the top yields four footpad recesses, facilitating easy stacking of subwoofers for array configurations. The enclosure’s surface is coated with a durable black water-based semi-gloss paint, and it is constructed using 18mm plywood. The enclosure’s surface is coated with a durable black water-based semi-gloss paint, and it is constructed using 18mm plywood.

General Specifications
Power Handling 2000 W (AES)
Program Power Handling 4000 W
Peak Power Handling 8000 W
Nominal Impedance 4 Ω
Average Sensitivity 98 dB @ 1W/1m
Calculated Max SPL / 1m 130 dB (continuous)
Max SPL (Program) 133 dB (program)
Max SPL (Peak) 136 dB (peak)
Manufacturing Consistency 35 Hz to 200 kHz (±3 dB)
Nominal Directivity (-6dB) Omnidirectional
Recommended Amplifier ≥ 1600 W @ 8Ω
Recommended Low Cut (Full Range) N/a
Recommended Low Cut (with sub) N/a
Crossover No, active usage only, Fane recommended DSP
Low Frequency Driver 2 Precision Devices ferrite transducer, 8Ω impedance, 18” (460 mm) diameter, 4” high temperature voice coil on glass fibre former
High Frequency Driver N/a
Recommended Crossover LPF 70 - 125 Hz, 24 dB/ Oct Butterworth/ Linkwitz-Riley
Nominal Size 18-inch
Type Passive Subwoofer System
Frequency Response (±3dB) 35 Hz - 200 Hz (±3 dB)
Frequency Response (-10dB) 28 Hz - 200 Hz (-10 dB)
Construction and Shipping Information
Pole Mount 35 mm
Flying Hardware N/a
Connectors 2 Neutrik Speakon NL4
Cabinet CNC made with tongue and groove assembly, 18 mm void-free, exterior grade, birch plywood
Finish Black water-based paint
Cabinet Size (HxWxD) 580 x 1160 x 940 mm
Shipping Carton Size (HxWxD) 700 x 1320 x 1040 mm
Net Weight 98 kg net
Gross Weight 102 kg gross
DescriptionSizeFormatGet File
HP-218 Datasheet0.52Mb.pdfDOWNLOAD
Stay connected. Get fresh content from Fane to your email box
© 2018 Fane Pro Audio Limited. All rights Reserved. Site developed by Edoru
You've reached the maximum comparison limit of four products.
Please choose one of the following options....