Storm Ultra 3



Data Sheet
(0 Reviews)  Review this item


  • 1000 W AES power handling.
  • 132 dB continuous SPL output.
  • Equipped with premium Fane driver components.
  • 35 - 18500 Hz usable frequency range.
  • Void-free birch plywood enclosure construction.
  • Proprietary HardTex paint finish with matt black topcoat.
  • Neutrik Speakon NL8MP connectors.
  • Near field main PA reinforcement, front of house with medium throw.
  • Can be used with or without subwoofer in permanent installations such as nightclubs, bars, auditoriums and arenas.

The Storm Ultra 3 is a full range, three-way system suitable for near field main PA reinforcement, front of house with medium throw and can be used with or without subwoofer in permanent club and bar installations. The unit may be flown by using the internal M8 Flying points for larger venue installations.

Delivering incredible bass and presence from 35Hz - 18 kHz. The Ultra 3 consists of two 12-inch low frequency drivers, in a horn loaded configuration combined with three sealed, 8-inch mid-range drivers. Complimented by three 1-inch compression drivers mounted to 60° x 80° low resonance constant directivity horns. The lower third of the mid/high section features an angled downfill that further enhances the Ultra 3’s already impressive coverage area.



The cabinet is constructed from 18 mm, void-free birch plywood with tongue and groove assembly and integrated handles. A black powder coated, hexagonal grille offers protection to the internal components and the cabinet is finished with a matt black HardTex paint.

An amplifier capable of delivering 2000 W (4 ohm) is required for the bass section and another to deliver 1500 W (8 ohm) for the mid/high section.

General Specifications
Power Handling 1000 W (AES)
Program Power Handling 2000 W
Peak Power Handling 4000 W
Nominal Impedance 4 Ω
Average Sensitivity 102 dB/ 2.83V/ 1m (avg. 50-16000 Hz wideband)
Calculated Max SPL / 1m 132 dB continuous
Max SPL (Program) 135 dB
Max SPL (Peak) 138 dB
Frequency Response (-6dB) 35 - 18500 Hz
Manufacturing Consistency ± 3 dB from 50 to 10000 Hz
Nominal Directivity (-6dB) 80° x 60° above 1800 Hz
Recommended Amplifier ≤ 1500 W @ 4Ω (no clip) in specified frequency response
Recommended Low Cut (Full Range) Full range: 30 Hz 24dB/ Oct Linkwitz-Riley
Recommended Low Cut (with sub)
Crossover Active three way crossover required
Low Frequency Driver 2x Custom transducer, 8Ω impedance (4 Ω load) 12” (304 mm) diameter, 4” high temperature voice coil on glass fibre former
High Frequency Driver 3x High frequency driver, 12 Ω impedance (4 Ω load), 1” (25.4mm) exit with 1.73” voice coil, titanium diaphragm
Recommended Crossover N/A
Nominal Size 12 Inch
Type Three-Way, Passive
Mid Frequency Driver 3x Fane transducer, 12 Ω impedance (4 Ω load) 8” (203.2 mm) diameter, 2” high temperature voice coil on glass fibre former
Construction and Shipping Information
Pole Mount N/A
Flying Hardware 8 M8 points with internal metal brackets
Connectors 2 Neutrik Speakon NL8MP
Cabinet CNC made with tongue and groove assembly, 18 mm exterior grade, void-free, birch plywood
Finish Proprietary HardTex, sand based paint with matt black topcoat finish
Cabinet Size (HxWxD) 704 x 675 x 633 mm
Shipping Carton Size (HxWxD) 774 x 740 x 723 mm
Net Weight 67.5 Kg
Gross Weight 74.3 Kg
Optional Accessories Flight case with 100mm wheels (4 or 6 pcs.).
Abrasive resistant cover bag.
Flying hardware accessories.
Adjustable coupling bar for flying 2 pcs.
Architectural single stabiliser/ tilt arm for single cabinet on 3 stack H1-118S.
Architectural single stabiliser/ tilt arm for two cabinets on 3 stack H1-218S
DescriptionSizeFormatGet File
Storm-Ultra 3 Datasheet1.43Mb.pdfDOWNLOAD
Stay connected. Get fresh content from Fane to your email box
© 2018 Fane Pro Audio Limited. All rights Reserved. Site developed by Edoru
You've reached the maximum comparison limit of four products.
Please choose one of the following options....