Fane Pro Audio ST-10 Fane Pro Audio ST-10
TFane Pro Audio ST-10 TFane Pro Audio ST-10



Data Sheet
(0 Reviews)  Review this item


  • 300 W RMS power handling.
  • 122 dB continuous SPL output.
  • Equipped with premium Fane cast frame drivers.
  • Elliptic 80° x 50°, low resonance, rotatable glass fibre horn.
  • Void-free birch plywood cabinet, tongue and groove assembly.
  • Touring grade HardTex coating with black matt finish.
  • 8x M8 mounting points with internal metal brackets.
  • 35 mm pole mount adapter.
  • Portable / install sound reinforcement.
  • Stage monitoring.
  • Main PA / side fill / delay fill / diffusion.
  • Bars and restaurants.
  • Clubs, live music venues and theatres.

The ST-10 is a compact, full-range, multifunction enclosure suitable for a wide range of professional audio applications. The cabinet houses an ultra low distortion Fane 10” (2.5” voice coil) cast aluminium frame drive unit and a 1” titanium diaphragm compression driver coupled to a 80° x 50° rotatable, low resonance horn. This, combined with a fully optimised passive crossover network ensures superior audio output and quality with or without additional subwoofer support.



The enclosure is constructed from 15 mm and 18 mm void-free birch plywood with tongue and groove assembly and features a rear wedge design that enables the ST-10 to used for both front of house or monitor applications. The cabinet has a protective steel circular pattern grille fitted with an acoustic mesh backing and is finished in touring grade matt black HardTex paint, for maximum protection on the road. For pole or stand mounting, a 35 mm ‘top-hat’ is also incorporated along with 8 M8 mount points with internal metal brackets.

General Specifications
Power Handling 300 W RMS (AES)
Program Power Handling 600 W
Peak Power Handling 1200 W
Nominal Impedance 8 Ω
Average Sensitivity 97 dB @ 1W/1m
Calculated Max SPL / 1m 122 dB continuous
Max SPL (Program) 125 dB
Max SPL (Peak) 127 dB
Frequency Response (-6dB) 55 - 18500 Hz
Manufacturing Consistency ± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB) 80° x 50°
Recommended Amplifier ≤ 600 W @ 8Ω
Recommended Low Cut (Full Range) 45 Hz, 24 dB/ oct Butterworth
Recommended Low Cut (with sub) 70 to 140 Hz, 24 dB/ oct Linkwitz-Riley
Crossover Passive @ 2.6 kHz
Low Frequency Driver Fane transducer, 8Ω impedance, 10” (250 mm) diameter cast frame, 2.5” high temperature voice coil on glass fibre former
High Frequency Driver Fane compression driver 8Ω impedance, 1” (25 mm) exit, 1.75” (44 mm) voice coil, titanium diaphragm
Recommended Crossover
Nominal Size 10 Inch
Type Two-Way, Passive
Construction and Shipping Information
Pole Mount 35 mm Aluminium pot
Flying Hardware 8x M8 points with internal metal brackets
Connectors 2 Neutrik Speakon NL4
Cabinet CNC made with tongue and groove assembly, 15 mm and 18 mm, exterior grade, void-free, birch plywood
Finish Proprietary HardTex, sand based paint with matt black topcoat finish
Cabinet Size (HxWxD) 530 x 330 x 325 mm
Shipping Carton Size (HxWxD) 580 x 380 x 375 mm
Net Weight 18 kg net
Gross Weight 17 kg gross
Optional Accessories
DescriptionSizeFormatGet File
ST-10 Datasheet0.54Mb.pdfDOWNLOAD
Stay connected. Get fresh content from Fane to your email box
© 2018 Fane Pro Audio Limited. All rights Reserved. Site developed by Edoru
You've reached the maximum comparison limit of four products.
Please choose one of the following options....